Purify

with original firmware:

• Log in to the camera with telnet IP 9527 (user root, password jco66688) within 5 minutes after startup.

• Press killall -9 auto_run.sh to avoid closing the connection.

with alternative firmware:

• Launch the SSH service of the internet interface

• Connect to the camera by ssh IP (user root, password ismart12).

Then, whatever the firmware:

• start “gdbserver”of the camera, e.g. :

  /opt/media/mmcblk0p1/bin/gdbserver localhost:2000 /opt/media/mmcblk0p1/bin/motor

  • Start GDB on the computer, for example:

    cd programada_medio/toolchain
    bin/mips-linux-uclibc-gnu-gdb ../fontoj/motor/motor 
    target remote 192.168.xxx.xxx:2000
    handle SIGPIPE nostop
    handle SIG32 nostop
    break xxx
    continue